Most poly sheeting sold in the US falls into five thicknesses: 2, 3, 4, 6 and 10 mil. Thin film (2–3 mil) is for drop cloths and short dust jobs. 4 mil is the general cover. 6 mil is the standard for crawlspaces, temporary enclosures and, in many places, as the minimum under a slab. 10 mil is for heavy traffic and for under-slab work where the spec calls for ASTM E1745 Class A. UV stabilizer is a separate choice: add it when the sheet will sit in the sun for more than a few weeks. Below is the ladder, the code points that decide the vapor barrier question, and a checklist for ordering your own rolls.
For the basics, see our polythene sheeting overview and mil and micron chart.
The thickness ladder
| Mil | Micron | Typical uses |
|---|---|---|
| 2 mil | 51 µm | Painting drop cloths, covering furniture, one-day dust cover |
| 3 mil | 76 µm | Drop cloths that see foot traffic for a few days, light masking |
| 4 mil | 102 µm | General cover for materials, dust barriers during renovation, light ground cover |
| 6 mil | 152 µm | Crawlspace ground cover, vapor retarder under slab where the local code allows 6 mil, temporary walls and winter enclosures |
| 10 mil | 254 µm | Heavy-duty ground cover, crawlspaces with storage or equipment, under-slab where 10 mil or ASTM E1745 is specified |
These are the steps US distributors stock most. Husky (Poly-America) sheeting, for example, is listed in 4, 6 and 10 mil, in clear, black and white. Thickness is not the whole story: two 6 mil rolls from different resins can behave very differently on site.
Vapor barriers: where 6 mil is enough and where it is not
Under a concrete slab
The International Residential Code (2018 edition, R506.2.3) calls for a 6 mil polyethylene or approved vapor retarder between the slab and the base course, with joints lapped at least 6 inches. That is why 6 mil is the default for house slabs in many states. But codes are adopted and amended locally. Oklahoma, for example, also allows other industry-accepted retarders installed to the maker’s instructions. South Carolina requires a 10 mil retarder that meets ASTM E1745 Class A.
ASTM E1745 is the standard for plastic vapor retarders in contact with soil or granular fill under slabs. All three classes have a 0.1 perm maximum. They differ in strength: Class A requires 2,200 g puncture resistance and 45 lbf/in tensile strength, Class B 1,700 g and 30 lbf/in, Class C 475 g and 13.6 lbf/in. Class A products are usually 10 mil or thicker.
Plain 6 mil construction film is usually not tested to E1745, and much of it will not reach Class A or B. One trade article puts typical 6 mil poly at around 260 g of puncture resistance, far below the Class A figure. Some purpose-made 6 mil products do claim Class C. So the honest answer is this: if a spec names ASTM E1745, sell a product with a test report for that class, not generic sheeting.
Crawlspaces
For unvented crawlspaces, IRC R408.3 asks for a continuous Class I vapor retarder over the exposed earth, joints overlapped 6 inches and sealed or taped, and the edges run at least 6 inches up the stem wall. The code does not name a thickness. Green Building Advisor calls 6 mil an effective Class I retarder and suggests 10 mil or thicker where people walk or store things in the crawlspace. Where radon control applies, the code’s radon appendix asks for 12-inch laps.
Clear, black or white
- Clear lets light through. Good for temporary walls and windows where workers need to see, and for curing or frost covers. It also lets the installer see the ground under a ground cover.
- Black blocks light. Use it where you want to stop weeds growing under a cover, or need privacy and opacity. It absorbs heat in the sun, which can matter for what sits underneath.
- White is opaque and reflects heat. It is common for enclosures and covers where you want to keep the space or the stored goods cooler.
Other options you will see on the market
LDPE vs LLDPE blends. Pure LDPE is soft and cheap. Adding LLDPE raises puncture and tear resistance, which lets some brands sell a thinner film for the same job. Ask what the blend is when you compare quotes.
String-reinforced sheeting. A layer of poly scrim between two film layers. It stops tears from running, which suits windy sites and building enclosures.
Fire-retardant (FR) poly. Some job sites and fire departments require FR sheeting for temporary enclosures. US suppliers usually state that it meets NFPA 701, often Test Method 2 (the large-scale test). Ask any supplier for the test report and method, and check with the local fire authority.
When to add UV
Sunlight breaks down polyethylene. Untreated film gets brittle, then cracks and tears. A UV stabilizer is an additive mixed into the resin that slows this down. It buys time, not forever.
How much time is each supplier’s own claim, and claims vary a lot. One US retailer lists construction sheeting UV stabilized for 24 months and says its UV plastic lasts up to 4 years. Others mark standard rolls “not UV rated”. Do not move a number from one product to another.
A simple rule: under a slab or in a closed crawlspace, the sheet sees no sun and needs no UV. Outdoors for more than a few weeks, add it. We add UV stabilizer to poly sheeting and pallet covers on request.
Common US roll sizes
The sizes on most shelves are 10 x 100, 20 x 100, 32 x 100 and 40 x 100 ft. Wide sheets are usually folded down to a narrower width before winding on a core, so the roll fits on a shelf and can be handled on site. One 10 x 100 ft listing we checked, for example, is center-folded on a 3-inch core. Agree the folding up front: it changes how fast crews can lay the sheet out.
How to spec an order
Give any supplier these points:
- Thickness, in mil, and whether it is nominal or minimum.
- Width, unfolded, and whether you want it flat or folded (and the folded width).
- Roll length.
- Colour: clear, black, white or other.
- UV stabilizer: yes or no.
- Resin: LDPE or LDPE/LLDPE blend.
- Core: inside diameter and material.
- Labelling: your roll label, box or carton design, barcode and shipping marks.
- Standards your customers ask for, such as ASTM E1745 or NFPA 701, with the test report you need.
Poly sheeting is one of our main products. Our stretch film and poly sheeting lines run about 2,000 MT a month, and almost everything is made to your spec. Tell us the width and folding you need and we will confirm what we can run. Private label is standard: your roll label, carton design, barcode labels and shipping marks. Every item carries a tracing number for quality control. Lead time is 4–6 weeks for a first order and 3–4 weeks for a repeat. We work under JIS and ISO 9001, and we send free samples. See our poly sheeting, pallet covers and lay-flat poly tubing.
Frequently asked questions
Is 6 mil poly a vapor barrier?
Yes, polyethylene at 6 mil is a Class I vapor retarder, and the IRC accepts 6 mil under residential slabs. But many specs for commercial slabs, and some state codes, call for ASTM E1745 or 10 mil. Generic 6 mil sheeting is usually not tested to E1745.
What is the difference between 4 mil and 6 mil plastic sheeting?
6 mil is 50% thicker, so it resists punctures and tears better and costs more. 4 mil is fine for dust walls and covers that will not be walked on. Use 6 mil for ground cover, crawlspaces and enclosures.
How long does UV-stabilized poly sheeting last outdoors?
It depends on the product, the additive level, the climate and the thickness. Suppliers make their own claims, from several months to a few years. Ask for the rating in writing for the exact product you buy.
Can I order poly sheeting under my own brand?
Yes. We use your roll label, carton design, barcode labels and shipping marks.
Ready to compare? Send us your spec or WhatsApp +84 898 545 893, and ask for free samples.
Sources: Poly-America Husky sheeting listings, Airgas; Husky 20 x 100 ft 6 mil white, MyTarp; Tex-Trude 6 mil 10 x 100 ft, Mill Supply; Okla. Admin. Code 748:20-6-10 (IRC R506.2.3); S.C. Code Regs. 8-1225 (IRC R506.2.3); ASTM E1745-17 preview; Waterproof! magazine, Dec 2025; Green Building Advisor, crawlspace vapor retarders; Uline reinforced FR poly sheeting; Farm Plastic Supply, UV plastic.

